Descargar Imprimir esta página

Maytag Amana Easy Touch Control 500 Guía De Uso Y Cuidado página 9

Ocultar thumbs Ver también para Amana Easy Touch Control 500:

Publicidad

Idiomas disponibles

Idiomas disponibles

@
To cancel
the Clock display:
If you do not want the time of day to dispHay:
Press and hoHdthe CanceHand CHock
pads for three seconds. The time of day
wiHH disappear from the dispHay
When the chock dispHayis cancelled, press
--
Clock
the CHockpad to briefly dispHaythe time
of day.
To restore
the Clock display:
Press and hoHdthe CanceHand CHockpads for three seconds.
The time of day wiHH reappear in the dispHay.
The timer can be set from one minute (00:01_) u p to 99 hours
and 59 minutes (99:5d).
The timer can be used independentHy of any other oven
activity'. It can aHsobe set whiHeanother oven function is
operating.
The Timer does not controHthe oven. It onHycontroHsa
beeper.
Timer
To set the Timer:
1= Press the Timer pad.
,00:00 Hightsin the dispHay.
, The coHonwiHH flash.
2. Press the A or V pad untiHthe
correct time appears in the dispHay.
, The coHonwiHH continue to flash.
3,
Press Timer pad again or wait four seconds.
, The coHoncontinues flashing and the time begins
counting down.
, The Hastminute of the timer countdown wiHH be dispHayed
as seconds.
4= At the end of the set time, one Hongbeep wiHH sound.
To cancel
the Timer:
1. Press and hoHdthe Timer pad for three seconds.
OR
2. Press the Timer pad and set the time to 00:00.
Locking the Contro
and Oven Dooc
The touch pad controHsand oven door can be Hockedfor
safety, cleaning, or to prevent unwanted use. They wiil not
function when Hocked.
If the oven is currentHy in use, the controHsand door cannot be
Hocked.
The current time of day wiHH remain in the dispHaywhen the
controHsare Hocked.
To lock:
Press and hoHdthe CanceHand Cook &
HoHdpads for three seconds.
LOCK flashes in the dispHay.
To unlock:
HoHd
Press and hoHdthe CanceHand Cook & HoHdpads for three
seconds.
LOCK disappears from the dispHay.
Faumt Codes
BAKE or LOCK may flash rapidHyin the dispHayto aHertyou if
there is an error or a probHem=If BAKE or LOCK flash in the
dispHay,press the CanceHpad. If BAKE or LOCK continue to
flash, disconnect power to the appHiance. Wait a few minutes,
and then reconnect power. If the flashing stiHH continues,
disconnect power to the appHianceand caHH an authorized
servicer.
8

Publicidad

loading