Descargar Imprimir esta página

Maytag Amana Easy Touch Control 500 Guía De Uso Y Cuidado página 19

Ocultar thumbs Ver también para Amana Easy Touch Control 500:

Publicidad

Idiomas disponibles

Idiomas disponibles

Oven Door
- Do not place excessive weight
on or stand on an open
oven door, This could cause the range to tip over. break
Leveling Legs
Do not attempt to open or close door or operate oven until
Never place fingers between
hinge and front oven frame.
Hinge arms are spring
mounted,
if accidentally
hit. the
hinge wilJ siam shut against oven frame and could injure
To remove:
1. When cool, open the oven door to
the first stop position (opened
about four inches}.
2. Grasp door at each side. Do not
use the door handle to lift door.
3. Lift up evenly until door clears
hinge arms.
To repJace:
1. Grasp door at each side.
2. Align slots in the door with the hinge arms on the range.
3. Slide the door down onto the hinge arms until the door is
completely seated on the hinges. Push down on the top
corners of the door to completely seat door on hinges.
Door should not appear crooked.
Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
1
Oven Window
To protect
the oven
door
window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
Be Su re the a nt!-ti p b racket secures one of the rear
leveling !egs to the floor. This b(acket prevents _he rang e
from accidentally tipping.
Oven Light
(style varies by model}
-Disconnect power to range before repUacing light bulb,
o Make sure bu!b cover and bulb are cooUbefore touching,
To replace
oven light bulb:
1. When oven is cool, hold bulb cover
_o_oovER
in place, then slide wire re-
tainer off cover. Note: Bulb
cover wiii fail if not held in
place while removing wire
retainer.
RETAINER
Remove bulb cover and light bulb.
Replace with a @-watt appliance bulb.
2.
3.
4.
5.
Replace bulb cover and secure with wire retainer.
Reconnect power to range. Reset clock.
OR
1. Use a dry potholder and very carefully unscrew bulb cover
and bulb.
2. Replace with a 40 watt, oven-rated appliance bulb. Bulb
with a brass base is recommended to prevent fusing of
bulb into socket.
3. Replace bulb cover and reconnect power to range.
4. Reset clock.
18

Publicidad

loading