Descargar Imprimir esta página

Maytag Amana Easy Touch Control 500 Guía De Uso Y Cuidado página 8

Ocultar thumbs Ver también para Amana Easy Touch Control 500:

Publicidad

Idiomas disponibles

Idiomas disponibles

@
Control
Panel
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
A
B
Bake
X
Broil
Cook&
Hold
Delay
t
F
The controi pand is designed for ease in programming. The dispiaywindow on the controi shows time of day, timer and oven functions.
Controi pand shown includes modal specific features. (Styiing may vary depending on modek}
A
B
C
D
E
F
H
m
Broii
Bake
More (A} or
Less (V}
Timer
Cook &Hoid
Dday
CHock
Keep Warm
Cancei
Use for broihng and top browning.
Use for baking and roasting.
Enters or changes time, oven
temperature. Sets HI or LO broil.
Sets Timer.
Bakes for a preset time, then holds food
warm for 1 hour.
Programs the oven to start baking at
a later time.
Use to set time-of-day clock.
Use to keep cooked food warm in oven.
Cancels all operations except Timer
and Clock.
Using the Touchpads
Press the desired pad.
Press the A or V pad to enter time or temperature.
, A beep will sound when any pad is touched.
, A double beep wiii sound if a programming error occurs.
Note:
Four seconds after pressing the A or _' pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the A or V pad, the function will be canceled and the
display will return to the previous display.
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change
the clock
to
2a-hour
format:
1. Press and hold the Cancel and Delay
pads for three seconds.
2. Press A or V pad to select 12 or
24 hour.
--
Delay
3. Set the time of day following the directions below.
To set the
Clock:
1. Press the Clock pad.
[}look
. Colon flashes in the display.
2. Press A or V pad to set the time of day.
, Colon continues flashing.
3. Press the Clock pad again or wait four
seconds. The colon stops flashing.
When electrical power is supplied or after a power interrup-
tion, the last clock time before power was interrupted will
flash.
To recall the time of day when another time function is
showing, press the Clock pad.
Clock time cannot be changed when the oven has been
programmed for Delay Cook or Clean, or Cook & Hold.
conto

Publicidad

loading