Descargar Imprimir esta página

Maytag Amana Easy Touch Control 500 Guía De Uso Y Cuidado página 9

Ocultar thumbs Ver también para Amana Easy Touch Control 500:

Publicidad

Idiomas disponibles

Idiomas disponibles

@
To canoe!
the Clock dispmay:
If you do not want the time of day to dispHay:
Press and hoHdthe Cancel and Clock
pads for three seconds. The time of day
wiHH disappear from the dispHay
When the chock dispHayis cancelled, press
the Clock pad to briefly dispHaythe time
of day.
To restore
the Clock display:
Press and hoHdthe Cancel and Clock pads for three sec-
onds. The time of day wiHH reappear in the dispHay.
--Cmoek
The timer can be set from one minute (0:011) u p to 99 hours
and 59 minutes (99:591).
The timer can be used independentHy of any other oven
activity. It can aHsobe set whiHeanother oven function is
operating.
The timer does not controHthe oven. It onHycontroHsa beeper.
To set the Timer:
1. Press the Timer pad.
Timer
,0:00 Hightsin the dispHay.
, The coHonwiHH flash.
2. Press the A or V pad untiHthe
correct time appears in the dispHay.
, The coHonwiHH continue to flash.
3. Press Timer pad again or wait four seconds.
, The coHoncontinues flashing and the time beguns
counting down.
, The Hastminute of the timer countdown wiHH be dispHayed
as seconds.
4. At the end of the set time. one Hongbeep wiHH sound.
To cancel
the Timer:
1. Press and hoHdthe Timer pad for three seconds.
OR
2. Press the Timer pad and set the time to 0:00.
Locking the Contro
The touchpad controHs carl be Hockedfor safety, cHeaning,or
to prevent unwanted use. They wiHH not function when Hocked.
If the oven is curmntHy in use. the controHscannot be Hocked.
The current time of day wiHH remain in the dispHaywhen the
controHsare Hocked.
To lock:
Press and hoHdthe Cancel and Cook &
Hold pads for three seconds. (Press
Cancel pad first._)
Cook&
HoHd
To unlock:
Press and hoHdthe Cancem and Cook & Homdpads for three
seconds. (Press Cancel pad first._)
Faumt Codes
BAKE or LOCK may flash rapidHyin the dispHayto aHertyou if
there is an error or a probHem. If BAKE or LOCK flash in the
dispHay,press the Cancem pad. If BAKE or LOCK continue to
flash, disconnect power to the appHiance. Wait a few minutes.
and then reconnect power. If the flashing stiHH continues.
disconnect power to the appHianceand caHH an authorized
servicer.
8

Publicidad

loading