Publicidad
Idiomas disponibles
Idiomas disponibles
Handle the in-line slitters with care and store them safely into their box when not
●
used with the printer.
Risk of cutting your fingers! Uninstall the in-line slitters when manipulating the
●
curing module or accessing the substrate path.
Take care when using the air gun. When used for cleaning purposes, make sure to
●
use it according to the local regulations since additional safety provisions may apply.
WARNING!
both latches in the open position. It may open inadvertently and cause serious injuries.
Always check that it has both latches closed properly.
Sound pressure level
The sound pressure level could exceed 70 dB(A) in some print modes. Hearing protection
may be required.
Chemical hazard
Sufficient ventilation should be provided to ensure that potential airborne exposure to
these substances is adequately controlled.
See the safety data sheets available at
chemical ingredients of your consumables. Consult your usual air-conditioning or EHS
specialist for advice on the appropriate measures for your location. For more detailed
information, see the "Ventilation" section of the site preparation guide.
Heavy substrate hazard
Special care must be taken to avoid personal injury when handling heavy substrates.
Handling heavy substrate rolls always requires two people. Care must be taken to
●
avoid back strain and/or injury.
Always use a forklift, pallet truck, or other handling equipment to lift substrates. The
●
printer has been designed to be compatible with many of these devices.
Always wear personal protective equipment including boots and gloves.
●
Ink and condensates handling
HP recommends that you wear gloves when handling ink and condensate system
components.
Be careful when you open the loading table; never leave it unattended with
http://www.hp.com/go/msds
Ink and condensates handling
to identify the
7
Publicidad
