Sony Trinitron GDM-FW900 Manual De Instrucciones página 13

■ EASY mode
In EASY mode, you can fine tune the color temperature by
changing the three preset temperatures — 5000K, 6500K, or
9300K.
1 Move the joystick up or down to select the color
temperature row
[T|.
Then move the joystick left or
right to select a color temperature.
The preset color temperatures are 5000K, 6500K, and 9300K.
The default setting is 9300K. The whites will change from a
bluish hue to a reddish hue as the temperature is lowered to
6500K and 5000K.
2 If necessary, fine tune the color temperature.
Move the joystick up or down to select the color
temperature row
\2\.
Then move the joystick left or
right to fine tune the color temperature.
If you fine tune the color temperature, the new color settings
are stored in memory for each of the three color temperatures
and item [7] of the on-screen menu changes as follows.
• [5000K]—►[ O 1]
• [6500K]—►[ 0 2]
• [9300K]—►[ 0 3]
■ EXPERT mode
You can make additional adjustments to the color in greater detail
by selecting the EXPERT mode.
1 Move the joystick up or down to select the color
temperature row
[T|.
Then move the joystick left or
right to select a color temperature.
2 Move the joystick up or down to select the
adjustment item [2]. Then move joystick left or right
to adjust the BIAS (black level).
This adjusts the dark areas of an image.
3 Move the joystick up or down to select the
adjustment item [3]. Then move the joystick left or
right to adjust the GAIN (white level).
This adjusts the light areas of an image.
You can adjust the R (red), G (green), B (blue) component of
the input signal when making changes to items \2\ and
[3],
If you fine tune the color temperature, the new color settings
are stored in memory for each of the three color temperatures
and item
[T]
of the on-screen menu change as follows.
• [5000K]—►[
[A]
1]
• 16500K ]—►[ [X] 21
• [9300K]—►[ 0 3]
■ sRGB mode
The sRGB color setting is an industry standard color space
protocol designed to correlate the displayed and printed colors of
sRGB compliant computer products. To adjust the colors to the
sRGB profile, simply select the sRGB mode in the COLOR menu.
Once you select the sRGB mode, the brightness (-Q-) and
contrast (3) values are automatically set to the values to be set in
the sRGB mode.
COLOR
EASY |EXPERT sRGB
-ft- : 5 6 3 :7 6 FOR sRGB
t£a IMAGE
RESTORATION OND
In order to display the sRGB colors correctly (y = 2.2, 6500K),
confirm that:
• the brightness (-Q-) and contrast (3) values are adjusted
respectively to the numbers shown in the BRIGHTNESS/
CONTRAST menu. If not, press the RESET button (for less
than 2 seconds). For information on how to change the
brightness and contrast, see "Adjusting the brightness and
contrast" on page 11.
• the color settings of your computer are set to the sRGB profile.
GB
Your computer and other connected products (such as a printer), must be
sRGB compliant.
(continued)
13