Kohler K-T314 Guia De Instalacion página 6

Stem
Valve Stem
Extension
Spline
Valve
Body
4. Install the Handles
NOTE: There are different handle styles available for this product.
Only one style of handle is shown. Installation of all handle styles is
identical.
Remove the plaster guards.
Close the valves (hot = clockwise, cold = counterclockwise).
Install a stem extension onto each valve stem spline. Make sure
that the splines are engaged.
Thread a handle assembly onto each valve body. Make sure the
splines in the handle and stem extension are engaged.
NOTE: The spline adapter allows fine adjustment of the handle
alignment. To adjust, remove the handle and reposition the spline
adapter.
Reinstall the handle and check the alignment. Repeat until the
handle alignment is satisfactory.
1012557-2-B
Handle
Assembly
Stem
Extension
6 Kohler Co.