Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage, basic safety precautions
must always be followed, including the following numbered warnings and subsequent
instructions. Do not use appliance for other than intended use.
14 This appliance has important markings on the plug blade. The entire supply cord is not suitable for
replacement. If damaged, please contact SharkNinja for service.
15 Extension cords should NOT be used with this appliance.
16 To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power
cord to contact any form of liquid.
17 DO NOT allow the cord to hang over the edges of tables or counters. The cord may become snagged
and pull the appliance off the work surface.
18 DO NOT allow the unit or the cord to contact hot surfaces, including stoves and other heating appliances.
19 ALWAYS use the appliance on a dry and level surface.
20 DO NOT allow children to operate this appliance or use as a toy. Close supervision is necessary when
any appliance is used near children.
21 This appliance is NOT intended to be used by people with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
22 ONLY use attachments and accessories that are provided with the product or are recommended by
SharkNinja. The use of attachments, including canning jars, not recommended or sold by SharkNinja
may cause fire, electric shock, or injury.
23 NEVER place a blade assembly on the motor base without it first being attached to its corresponding
container (pitcher or cup) with the lid also in place.
24 Keep hands, hair, and clothing out of the container when loading and operating.
25 During operation and handling of the appliance, avoid contact with moving parts.
26 DO NOT fill containers past the MAX FILL or MAX LIQUID lines.
27 DO NOT operate the appliance with an empty container.
28 DO NOT microwave any containers or accessories provided with the appliance.
29 NEVER leave the appliance unattended while in use.
30 DO NOT blend hot liquids. Doing so may result in pressure buildup and steam exposure that can pose
a risk of the user being burned.
31 DO NOT process dry ingredients with the Single-Serve Blending Cup and Pro Extractor Blades® Assembly,
the pitcher and Stacked Blade Assembly or the processor bowl and Chopping Blade Assembly.
32 To reduce the risk of injury, never place Chopping Blade Assembly or discs on base without first
putting bowl properly in place.
33 DO NOT perform grinding operations with the Single-Serve Blending Cup and Pro Extractor Blades
Assembly, the pitcher and Stacked Blade Assembly, or the processor bowl and Chopping Blade Assembly.
34 NEVER operate the appliance without lids and caps in place. DO NOT attempt to defeat the interlock
mechanism. Ensure the container and lid are properly installed before operation.
35 Before operation, ensure all utensils are removed from containers. Failure to remove utensils can
cause containers to shatter and potentially result in personal injury and property damage.
36 Keep hands and utensils out of containers while chopping to reduce the risk of severe personal
injury or damage to the blender/food chopper. A scraper may be used ONLY when the blender or
processor is not running. When using the processor, always use food pusher to add food. NEVER add
food by hand.
37 If you find unmixed ingredients sticking to the sides of the cup, stop the appliance, remove the blade
assembly, and use a scraper to dislodge ingredients.
38 DO NOT open the pitcher's pour spout cap while blender is operating.
ninjakitchen.com
SAVE THESE INSTRUCTIONS
39 If you find unmixed ingredients sticking to the sides of the pitcher, stop the appliance, remove the
lid, and use a spatula to dislodge ingredients. NEVER insert your hands into the pitcher, as you may
contact one of the blades and experience a laceration.
40 DO NOT attempt to remove the container or lid from the motor base while the blade assembly is still
spinning. Allow the appliance to come to a complete stop before removing lids and containers.
41 If the appliance overheats, a thermal switch will activate and temporarily disable the motor.
To reset, unplug the appliance and allow it to cool for approximately 30 minutes before using again.
42 DO NOT expose the containers and accessories to extreme temperature changes. They may
experience damage.
43 Upon completion of processing, ensure the blade assembly is removed BEFORE emptying container's
contents. Remove the blade assembly by carefully grasping the top of the shaft and lifting it from
the container. Failure to remove the blade assembly before emptying the container results in a risk of
laceration.
44 If using the pitcher's pour spout, hold the cover in place on the container or ensure lid lock is engaged
when pouring to avoid risk of injury.
45 Remove the Pro Extractor Blades® Assembly from the Single-Serve Cup upon completion of blending.
DO NOT store ingredients before or after blending them in the cup with the blade assembly attached.
Some foods may contain active ingredients or release gases that will expand if left in a sealed container,
resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup,
use only Spout Lid to cover.
46 The maximum wattage rating for this appliance is based on the configuration of the Pro Extractor
Blades Assembly and Single-Serve Cup. Other configurations may draw less power or current.
47 DO NOT submerge the motor base or control panel in water or other liquids. DO NOT spray motor
base or control panel with any liquid.
48 DO NOT attempt to sharpen blades.
49 Turn off the appliance and unplug the motor base before cleaning.
50 Unit is intended to create a dough ball. It is NOT intended to continuously knead. After dough ball
forms, additional kneading should be done by hand on a work surface. If the unit moves excessively
on the work surface, remove the dough ball and knead by hand.
ninjakitchen.com
Publicidad
