Control
Pad
Functions
Note:
The appearance of your oven control may differ slightly from the one illustrated
below. However, all functions are the same.
READ ALL INSTRUCTIONS CAREFULLYBEFOREUSING THE OVEN.
Detailed instructions
for each function
follow
later in this book.
For satisfactory use of your oven, become familiar with the various functions of the oven as
described below.
BAKE
Used to enter the
normal baking mode
CONV. BAKE/ROAST
Used to enter the
convection baking
or roasting mode
CLEAN
Used to select the
UP and DOWN ARROWS
Used to set the clock, the timer
and the oven tern
TIMER
A
O_OFF
TIMER
Used to set or cancel
the minute timer. The
minute timer does'nt
start or stop cooking.
CLEAR
Used to clear any oven
J
mode previously
entered except the
time of day and the
self-cleaning mode
VARI BROIL
Used to select the
variable broil mode
BAKETIME
Used to enter the
length of the
baking time.
BAKE
STOP \ CLOCK "_-_/
CLEAR
TIME
TIME
\
OFF
minute
timer. Push
\_
clear to stop cooking.
STOP TiM E _
Used with BAKE, OVEN COOK
TIME, and CLEAN to program _
CLOCK
delayed baking or delayed self-
Used to set the
cleaning cycle stop time.
time of the day.
Note:
Push buttons or pads may be shaped differently.
Note:
After the appliance is first plugged in, or after a power interruption, the clock must be set
to the correct time of day before the rest of the electronic control functions will operate.
The oven can be programmed
for:
• Conventional baking and roasting
• Convection baking and roasting
• Timed baking and roasting (conventional and convection) with automatic on and off times.
• Vari broiling
• Self-cleaning
For a silent control
panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for
silent operation. Push and hold STOPTIME
After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pushed. To return the sound, push and hold STOPTIME again for 7 seconds until a beep is heard.
10