Publicidad
Idiomas disponibles
Idiomas disponibles
Setting
the
Clock
FEATURE OVERVIEW
Clock
•
Minute Timer
Clock
When tile range is first plugged in, or when tile power supply to tile appliance has been interrupted, tile display will flash.
INSTRUCTIONS
To Set the
Clock:
(example
1:30)
I.
Push CLOCK. The word "TIME" will appear in the display. The
timer allows you 5 seconds to go to step 2.
2.
Push and hold the UP or DOWN ARROW to set the time of clay to
1:30. The word "TIME" will disappear after 6 seconds and the clock will
start. You may also push CLEAR OFF; the word "TIME" will
disappear and the clock will start.
DISPLAY
:',p_
Minute
Timer
Note:
The minute timer does not start or stop cooking and is not active during self-clean. It serves as an extra timer in the
kitchen that will beep when the set time has run out. The minute timer can be used independently during any of the bake or
broil functions. The timer can be set for any amount of time from 5 seconds to 9 hours and 55 minutes.
INSTRUCTION
To Set the Minute
Timer
1.
Push TIMER ON/OFF, ":00" andtheword
"TIMER" will be displayed.
2.
Push and hold the UP ARROW until the desired time appears in the
display. As soon as the UP ARROW is released, the time will begin to
count clown in the display.
3.
When the set time has run out, the timer will beep 3 times and will
continue to beep once every 10 seconds for 5 minutes or until TIMER
ON/OFF is pushed.
When settingtheminutetimer
for:
The
time
will
appear
in the
display and increase in:
5 seconds to I minute 59 seconds
5 second increments
2 minutes to 9 minutes. 59 seconds
10 second increments
10 minutes to 59 minutes 59 seconds
I minute increments
I hourto 9 hours 55 minutes
5 minute increments
DISPLAY
To Change the Minute
Timer:
Push and hold tile UP or DOWN ARROW to increase or decrease tile time.
To Cancel the Minute
Timer before
the set time has run out:
Push and hold tile DOWN ARROW until ":00" appears in the display or push TIMER ON/OFF.
11
Publicidad
