Descargar Imprimir esta página

Hama Cube Instrucciones De Uso página 14

Ocultar thumbs Ver también para Cube:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
4.2 Alarm clock
Setting the alarm time
• Press the ALARM button (8) to go to alarm mode.
• Press and hold the ALARM button (8) to set the alarm time for the alarm displayed. The
hours display begins to ash.
• Press the +/RCC button (10) or the -/°C/°F button (11) to select the hour for the alarm
time, and con rm your selection by pressing the ALARM button (8). The minutes display
begins to ash.
• Repeat the process to set the minutes for the alarm time.
• Press the ALARM button (8) repeatedly to go back to the time display.
• If you do not make an entry for 20 seconds, the device automatically exits the settings
mode and the settings you made are saved.
Activating/deactivating the alarm clock
• Press the ALARM button (8) repeatedly to activate/deactivate the alarm time.
• If the alarm is activated, the corresponding symbol
Stopping the alarm clock/snooze function
• If the alarm is triggered, an alarm signal will sound for 2 minutes. The frequency of the
alarm signal increases the longer the alarm continues.
• Press the ALARM button (8) to stop the alarm.
Note – Snooze function
• While the alarm signal is sounding, press the SNOOZE/LIGHT button (12) to activate
the snooze function.
begins to ash on the display. The alarm signal will be stopped for 10 minutes,
after which it will sound again.
14
is displayed.

Publicidad

loading

Este manual también es adecuado para:

0018630400186305