Before use
What's in the box
Check to be sure the box includes all the supplied accessories shown
below. Please contact the store where you purchased this unit if
any of these accessories are missing or have been damaged during
transportation.
Power cord × 1
HDMI cable × 1
Remote control (RC-1315) × 1
Batteries for remote control (AAA) × 2
Felt pads × 4
Owner's manual (this document) × 1
Warranty card × 1
8
Note about pinpoint feet
High-precision metal pinpoint feet are attached firmly to the bottom
plate of this unit.
The stands for these feet are loose, but when the unit is placed in
position, it is supported by these pinpoint feet, which will effectively
disperse vibrations.
Chassis
Foot-stand (metal)
o Apply the included felt pads to the bottoms of the foot-stands to
avoid scratching the surface where the unit is placed.
Maintenance
Use a soft dry cloth to wipe the surface of the unit clean.
For stubborn smudges, use a damp cloth that has been thoroughly
wrung out to remove excess moisture.
Avoid allowing rubber or plastic materials to touch the unit for
long periods of time because they could damage the cabinet.
Never spray liquid directly on this unit. Do not use chemically-treated
wipes, thinner or similar substances because they could damage the
surface of the unit.
V For safety, disconnect the power plug from the out-
let before wiping the unit.
Pinpoint foot (metal)
Screws that attach
foot-stand