Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
Operation
INTRODUCTION
Normal Standby Operation: The CAP2D is always in ready state and is monitoring its inputs for changes. If any of the inputs change
state, the CAP2D responds locally and communicates the change to myQ
Reader/Keypad Operation: The CAP2D is designed to work with an approved reader and keypad using standard 26 bit Wiegand format.
Some keypads may use ASCII format to pass Entry Codes.
Refer to the wiring diagram for physical connection to the CAP2D. Refer to the reader and keypad manual for full operating instructions.
Access Granted/Access Denied: When a valid credential is presented, access is granted with no audio or visual feedback from the
CAP2D. Some accessory devices may provide feedback. E.g., a card reader or receiver may beep or change colors of an LED to convey
the status.
Maintenance and Testing: No periodic maintenance or testing is required for the product to maintain safe normal operation.
PRE-INSTALL
WIRING
PRE-INSTALL
WIRING
NETWORK
ACCESS CONTROL
NETWORK
ACCESS CONTROL
Business™.
®
14
INSTALL
INSTALL
Publicidad
