Pioneer KEH-2300R Manual De Instrucciones página 18

AF Function
AF (Alternative Frequencies search) function
lets you set the receiver to search for other
frequencies within the same network
Organization as the currently frequency.
When the current frequency cannot be
properly received, or another frequency in
the network can provide better reception, AF
mutes the sound of the radio and
automatically re-tunes to the more suitable
frequency.
To turn off the AF function/
To activate the AF function
Pl SEEK
If the receiver cannot find a suitable
alternative frequency or the radio signal ts
too weak for proper reception, "Pl SEEK"
appears in the display, and the receiver
searches for another frequency broadcasting
the same, or related program.
During "PI SEEK", the sound of the radio
will be muted somewhat longer than for AF
search. Muting is released after "PI SEEK",
even if the radio could not find the same, or
related program, and returns to the previous
frequency.
18
AF is set ON by default.
« When you recall preset stations, the tuner
may update the preset after searching a
new frequency from that station's AF list.
(This is only available when using presets
on band FM1.)
« The preset number does not appear in the
display if the RDS data for the station
received is different from the originally
memorized RDS station.
* When AF is searching for the next
frequency, muting may be temporarily
interrupted by another program.
* You can turn AF ON or OFF independently
for each FM band.
« The tuner will only tune RDS stations when
you use SEEK tuning or BSM auto memory
with the AF function on.
« The "AF" indication blinks if you are tuned
to a non-RDS station.
Press the [AF] button.
("AF" goes out from the display.)
Press the [AF] button again.
("AF" lights in the display.)
Pl seek is set OFF by default
* You can turn PI seek ON by holding down
the [2] button while turning the ignition key
from OFF to either ACC or ON.