HP Smart Tank 7600 Serie Guía De Referencia página 4

Manual Setup
1
Fill the ink tanks
1. From the side of the printer, lift the ink
access door. Open the tank covers on
both sides of the printer.
2. Open the cap of the ink tank you
want to fill.
3. Twist open the ink bottle.
4. Place the bottle upside down on the tank
and click into place. Wait for the ink to
fill the tank.
5. C lose the ink bottle, firmly pushing
the cap onto the bottle.
6. Close the tank cap securely.
7. R epeat to fill all tanks.
8. A fter filling all tanks, close the tank covers
and ink access door securely.
With the door closed, wait approximately
15 seconds for the printer to check ink.
4
1
3
5
6
8
15
2
4
7