GE AEE08 Manual Del Propietario Y Instrucciones De Instalación página 10

Window Installation Instructions
r_ REMOVE THE AIR CONDITIONER
FROM THE CASE (CONT.)
rD'] Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case. Do not pull or
lift on the styrofoam discharge area.
Do not
pull or
lift in this
damage
to the
unit may
result
FRONT
I_ INSTALL THE BOTTOM CASE SEAL
, Peel the backing from the bottom case seal
and attach it along the bottom of the case in
front of the bottom mounting rail.
Bottom
mounting rail
/
Bottom case seal
10
rs] INSTALL THE TOP MOUNTING RAIL
ONTO THE CASE
Attach the top mounting rail onto the top of the
case with 3 Type B screws.
Press firmly to drive the screws into the gasket
and through the top mounting rail.
_e B
screws
[_ INSTALL THE SIDE ACCORDION
PANELS
[] Slide the left and right accordion panels into
the top and bottom mounting rails.
r_ Attach the accordion panels to the case using 3
Type A screws on each side.
Top mounting rail
TypeA
screws
\\
\\
BACK
Bottom mounting rail