GE AEE08 Manual Del Propietario Y Instrucciones De Instalación página 4

About the controls on the air conditioner.
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
NOTE: The display always
Light indicates the unit
shows the room temperature is inthe temperature or
except when setting the Set delay time Setmode.
temperature or the Delay
timer.
O
T__ Delay 1-24hr
Delay timer
0
Decrease
_ o,o _ .oo Cv]iz_ @
m High am Cool Mode select
am Med _ Energg Saver
m Low m Fon Only Fan speed
Temperature
set Increase
" and Decrease
Light indicates the delay
timer is set.
Delay timer
Increase
Air Conditioner Controls
Remote Control
Controls
Power Pad
Turns air conditioner on and off. When turned on,
the display will show the room temperature.
Display
Shows the room temperature or time remaining
on the Delay timer. Shows the Set temperature
while setting the temperature in Heat, Cool or
Energy Saver modes. The Set light will turn on
while setting.
Temp Increase A/Decrease T Pads
Useto set temperature when in Heat, Cad or
Energy Saver mode. The Set light will turn on while
setting.
Delay Timer Increase A (+)/Decrease T (-)
Pads
Eachtouch of the Increase A / Decrease T pads
on the unit or the Increase + / Decrease - pads
on the remote control will set the delay time when
using the Delay 1-24hr timer. The Set light will turn
on while setting.
Fan Speed Pads
Useto set the fan speed to Low, Med, High or
Auto on the unit. NOTE:On the remote control, use
the fan speed Increase + / Decrease - pads to set
the fan speeds to Law, Mealor High. Use the Auto
pad to turn Auto fan on.
Mode Pad
Use to set the air conditioner to Heat, Coal, Energy
Saver or Fan Only mode.
Delay Pads
Delay ON--When the air conditioner is off, it can
be set to automatically come on in i to 24 hours
at its previous mode and fan settings.
Delay OFF--When the air conditioner is on, it can
be set to automatically turn off in i to 24 hours.
How to set:
Pressthe Delay 1-24hr pad on the unit or on the
remote control. Each touch of the Increase A /
Decrease T pads on the unit or the Increase + /
Decrease - pads on the remote control will set the
timer in 1-hour intervals. The Set light will turn on
while setting.
To review the remaining time on the Delay 1-24hr
timer, press the Delay 1-24hr pad on the unit
or on the remote control. Use the Increase A /
Decrease T pads on the unit or the Increase + /
Decrease - pads on the remote control to set a
new time if desired.
To cancel the timer, press the Delay 1-24hr pad
until the light on the Delay 1-24hr pad goes off.
Note: The default temperature reading on the display is degree Fahrenheit (°F). To change the display to
degree Celcius (°C),press the Temp Increase A and Temp Decrease T buttons together and hold for 3
seconds. Repeat the process to change back to degree Fahrenheit (°F)
4