Descargar Imprimir esta página

Hach CAx440EX Instrucciones Para El Usuario página 8

Publicidad

Note: Specifications are subject to change without notice.
The cellular options in
Cellular model
Nordic nRF9160
(LXV449.98.01010)
An optional external cellular antenna is available for use with the CAx440EX field transmitter
(maximum gain 6 dBi).
Note: To keep regulatory compliance, use only the external antenna for the CAx440EX field transmitter that is
approved by the manufacturer (LXZ449.99.00009).
2.4 Icons used in illustrations
User supplied parts
2.5 Product overview
The CAx440EX field transmitter is used with a GS1440 or GS2440EX sensor. The field transmitter
supplies power to the sensor through the Power/4–20 mA sensor cable and receives the sensor
measurements through the Power/4–20 mA and RS-232 sensor cables.
The field transmitter transmits the hydrogen sulfide and temperature measurements (RS-232 signal)
to a cloud service called Hach H
In addition, the field transmitter can supply the sensor measurements (4–20 mA analog output) to a
device (e.g., SCADA or PLC).
Figure 1
and
Figure 2
8 English
Table 3
are available with the CAx440EX field transmitter.
Table 3 Cellular options
Frequency bands
Cat-M1 Bands: B1, B3, B8, B20, B66
S Data. Refer to
2
give an overview of the field transmitter.
Maximum power
23 dBm
Do one of these options
Use Hach H2S Data
on page 19.
Data transmission
4G (LTE Cat M1)

Publicidad

loading