Publicidad
13
2
oo I
'1
3
CONNECTIONS
BASIC CONNECTIONS
Connect the equipmentand accessoriesfollowing steps 1 to 3.
After connectingthe following items, as shown in illustrationI_II,
the unitis ready for operation.
• Refer also to page 30 on connecting optional equipment, for
example, a television or turntable.
1 Connect the speakers with the unit.
Connect the right speaker to the R terminal, and the left to the
L terminal.
Open the lever of the speaker terminals and insert the conductor
of the speaker cords with the stripe to • and that of the other
cords to G.
Then, shut the lever to lock.
®
®
2
®
®
LOOP
J,
IF FM
75_
• This speaker system is magnetically shielded. However, if
the speaker should affect the color on yourTV screen, turn off
the TV and turn it on again 15 - 30 minutes later. If the TV
screen still has poor color, place the speaker system away
from the TV.
• Do not leave magnets or objects generating magnetism near
the speaker system.
2 Connect the supplied antennas.
Connect the antenna cords, pushing the lever of each terminal,
and insert the conductor. Then, release the lever to lock.
FM: Connect the conductors of the supplied FM feeder antenna
®to the FM 75 _ terminals.
AM: Connect the conductors of the supplied AM loop antenna
@to the AM LOOP terminals.
8
To be continued.
Publicidad
