cecotec VISIONTOAST Manual De Instrucciones página 54

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Glass window
2. Toasting slot
3. Control panel
4. Intensity dial
5. Locking clamps of the glass panels
6. Crumb-collecting tray
7. ON/OFF button
8. Defrost button
9. Bagel button
10. STOP/START button
2. BEFORE USE
- This product includes a safety package to protect it during transport. Unpack the appliance
and keep the original packaging carton and materials in a safe place.
- It will help prevent any damage if the product needs to be transported in the future. In
case the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
- Plastic wrapping can cause suffocation hazards for babies and young children. Make sure
all packaging materials are out of reach of children.
- Inspect all parts of the appliance for visual damage. Unwind the power cord completely
and inspect it for damage. Do not use the product if it or its cord have been damaged or are
not working properly. In case of damage, contact the official Technical Support Service of
Cecotec for advice, repairs or returns.
- Make sure you have read and understood all instructions and warnings in this instruction
manual. Pay particular attention to the safety instructions on previous pages.
- Remove any adhesive labels and wipe the outside of the toaster with a damp cloth. Make
sure no packaging materials remain in the toasting slot and no object has fallen inside the
toaster.
- Place the toaster on an even, heat-resistant surface. Do not place the toaster near heat
sources, places with high humidity levels, or combustible materials.
- Plug the toaster into an appropriate wall outlet. The plug must have easy access, so that in
case of an emergency, it can be easily unplugged.
- Press the button ON/OFF.
- Set the toasting intensity dial to level 4, press STOP/START, and let your toaster heat up
without any bread.
VISIONTOAST
54