Publicidad
Idiomas disponibles
Idiomas disponibles
You can freeze the image shown on the screen.
When the broadcasting has SAP and monaural
audio...
When the broadcasting is having only monaural
audio...
(cannot be switched.)
1 Pausing image.
, Press [STILL], the image shown on the screen
is paused.
• The audio is not paused and keeps on reading
out.
• If the digital signal is gone or protected, the
image will remain paused and the audio will be
muted.
• The Still function will be released after 5
minutes.
2 Canceling Still function
, The Still function will be canceled by pressing
any button while Still function is working.
NOTE:
Press any key except [POWER] to cancel still mode,
This section describes how to switch the audio in
the analog mode and how to switch the audio lan-
guage in the digital mode.
1 Switch the audio.
• Every time you press [AUDIO], the audio will
be switched as below.
When the broadcasting has all audio...
STEREO
:
Outputs stereo-audio
SAP
: Outputs second audio program
MONO
: Outputs mono-audio
Switch the audio language.
, When you press [AUDIO], the currently selected
language and the number of received languages
will be displayed on the screen.
, Every time you press [AUDIO], the language
will be switched.
"Other" is indicated
when the language is not English,
Spanish or French.
* For international
stations audio
language will still be displayed as
English.
• Languages you can switch differ depending on
the receiving broadcast.
• The information display will automatically
dis-
appear in one minute.
NOTE:
The [AUDIO]
feature does not affect external source sound,
t-
Z
,-r
0
When the broadcasting has SAP and stereo
audio...
EN
Publicidad
