Publicidad
Idiomas disponibles
Idiomas disponibles
When you connect external devices including a
video cassette recorder and home audio system,
you can easily switch the input mode with the
remote control.
i_ptrr
-_
SELECT
ii_ _' ' iiiii_ii_
'_ili
1 Switch the input mode.
. When you press [INPUT SELECT] or [CH
A/T]
on the remote control, the input mode will
be switched as below.
TV/DTV
channel
0
Video|
0
Video2
0
Component1
I
Component2
!
HDMI
• To use the VIDEO1 or S-VIDEO1 INPUT jack on
the TV, select "Video1 ".
• To use the VIDEO2 or S-VIDEO2 INPUT jack on
the TV, select "Video2".
• To use the COMPONENT1
INPUT jacks on the
TV, select "Component1".
• To use the COMPONENT2
INPUT jacks on the
TV, select "Component2".
• To use the HDMI INPUT jack on the TV,
select "HDMI".
• When you press [INFO], the current external
input mode, the type of resolutions for video
signal, TV aspect ratio CC and TV rating will be
displayed at the top-right of the screen.
1) When using VIDEO1 or S-VIDEO1 INPUT jack
2) When using VIDEO2 or S-VIDEO2 INPUT jack
3) When using COMPONENT1
INPUT jacks
4) When using COMPONENT2
INPUT jacks
5) When using HDMI INPUT jack
• The information display will automatically dis-
appear in one minute.
EN
Publicidad
