Publicidad
Idiomas disponibles
Idiomas disponibles
You can enjoy your favorite picture mode selecting
from five picture default settings that will adjust col-
ors to enhance your viewing experience. Also, the
brightness, contrast, color, tint, sharpness color
temperature,
and energy saving setting can be
changed.
s_up
1 Display the setup screen.
. Press [SETUP].
The following setup screen is displayed.
Contrast
Using [,,_ / _], adjust to increase or decrease
contrast.
"q: To decrease contrast
I_: To increase contrast
Color
Using [4 / !1_],adjust to be brilliant or pale color.
,,9: To pale
_: To brilliant
Tint
Using [_1 / I_], adjust to obtain natural skin
tones.
• q: To red
I_: To green
2
Select "PICTURE", and press [ENTER] to con-
firm.
. Using [A/T],
select the your desired item and
press [ENTER] to confirm.
Sharpness
Using [',11 / !1_],adjust the detail of the picture.
"q: To soft
I_: To clear
3 Adjust the picture quality.
. Using [A/T],
select the picture quality item you
want to adjust.
Picture Mode
Using [A/T],
adjust Picture Mode from the
selection, then press [ENTER]. (Standard,
Dynamic, Movie, News and Manual)
ColorTemp.
Using [A/T],
adjust Color Temperature from the
selection, then press [ENTER]. (Cool, Neutral
and Warm)
Energy Saving
Using [.q l I_], adjust brightness of backlight.
• q: To bright
_: To dark
Brightness
Using [.q /I_], adjust until the darkest parts of
the picture are as bright as you prefer.
"q: To decrease brightness
I_: To increase brightness
. The adjustment bar for picture quality item is
displayed on the screen.
NOTE:
° To move to the normal screen, press [SETUP].
4 To exit the setup, press [SETUP].
EN
Publicidad
