Publicidad
Idiomas disponibles
Idiomas disponibles
en-us Testing the operation
9.4 Installing a four-wire connection
IMPORTANT: Use the four-wire cable from home power
1.
supply in the U.S. where local codes do not allow
grounding through neutral, New Branch circuit
installations (1996 NEC), mobile homes and
recreational vehicles, new construction and in Canada.
1
2
3
4
Cable from home power supply
1
Black wires
2
Red wires
3
4-wire flexible conduit from oven
4
Junction box
5
White wires
6
UL listed wire connectors
7
Green (or bare) ground wire
8
UL listed or CSA approved conduit connector
9
Connect the red oven wire to the red electrical supply
2.
wire (hot wire).
Connect the black oven wire to the black electrical
3.
supply wire (hot wire).
Connect the white neutral oven wire to the white neutral
4.
(not bare or green ground) electrical supply wire.
Connect the green ground oven wire to the bare or
5.
green ground electrical supply wire.
14
9.5 Installing a three-wire connection
IMPORTANT: Use the three-wire cable from home
1.
power supply only where local codes permit a three-
wire connection.
1
5
2
6
3
7
4
8
5
9
Cable from home power supply
1
Black wires
2
White wires
3
Green (or bare) ground wire (from oven)
4
4-wire flexible conduit from oven
5
Junction box
6
Red wires
7
UL listed wire connectors
8
UL listed or CSA approved conduit connector
9
Connect the red wire from the oven to the red wire in
2.
the junction box.
Connect the black wire from the oven to the black wire
3.
in the junction box.
Connect both green ground wire and white wire from
4.
the oven to the white, green or bare neutral wire in the
junction box.
Testing the operation
10 Testing the operation
Testing the operation
Check if your unit is working properly after you have
completed the installation steps.
Turn on power at the breaker.
1.
To test the oven select the BAKE mode. See the User
2.
Manual for detailed operating instructions.
Verify that the oven light comes on and the oven begins
3.
to preheat.
6
7
8
9
Publicidad
