Publicidad
Idiomas disponibles
Idiomas disponibles
The supporting base must be well secured to the floor
¡
or cabinet and must be level.
The cabinet opening must be plumb and the base must
¡
be flat and level.
When installing a side hinge oven, leave at least 10"
¡
(254 mm) clearance to allow the door to open.
Junction boxes can be located anywhere within reach of
¡
the oven's power cable.
The cabinet base must be flat and capable of
¡
supporting the weight of your unit. Refer to the
appliance weight table → Page 6 for the requirements of
your oven.
Under-oven dimensions are provided as a general
¡
guideline and may be adjusted as needed based on a
particular application. Consult a design professional for
optimizing personal preferences.
5 30" Single oven dimensions
30" Single oven dimensions
Read here for appliance and cabinet dimensions for
30" Single oven dimensions
30" single ovens.
5.1 30" Single oven appliance dimensions
7
16
5.2 30" Single oven traditional installation
*The junction box may be located above, beneath, left or
right of the unit within reach of the flexible conduit.
**Control panel overlap: min. 3/8" (10mm) to max. 2"
(51mm).
5.3 30" Single oven flush mount installation
Flush installation requires two side cleats to be attached
inside the cabinet frame, recessed from the front.
Top view bottom hinged door
30" Single oven dimensions en-us
7
Publicidad
