Before plugging in
Make sure your electricity supply is the same
l
as the one shown on the underside of your
appliance.
This appliance has a polarized plug (one blade
l
is wider than the other.) To reduce the risk of
electrical shock this plug will fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to
modify the plug in any way.
Before using for the first time
1
Remove the plastic blade covers from the knife
blade. Take care the blades are very sharp.
These covers should be discarded as they are to
protect the blade during manufacture and transit
only.
2
Wash the parts see 'care and cleaning'.
Key
Processor
Pusher
1
Feed tube
2
Lid
3
Bowl
4
Detachable drive shaft
5
Power unit
6
Pulse button
7
Speed 1 button
8
Speed 2 button
9
OFF button
bk
bl
Cord storage (at back)
Safety interlocks
bm
Knife blade
b
Dough tool (*included with certain models only)
b
4mm slicing/grating disc
b
2mm slicing/grating disc (*included with certain
b
models only)
Mini chopper/mill (*included with certain models
b
only)
Storage bag (*included with certain models only)
bs
Spatula
bt
To Use Your Food Processor
Illustrations
–
1
1
Fit the detachable drive shaft onto the power unit.
2
Then fit the bowl to the power unit and turn
clockwise until it locks into position.
3
Fit an attachment over the bowl drive shaft.
Always fit the bowl and attachment onto the
l
processor before adding ingredients.
4
Fit the lid - ensuring the top of the drive shaft/tool
locates into the centre of the lid.
5
Plug in, switch on and select a speed. (Refer to
the recommended usage chart).
The processor will not operate if the bowl or lid
l
are not fitted correctly into the interlock. Check
that the feed tube is positioned to the front and
the bowl handle is aligned to the right hand
side.
1
11
21
31
1
1
2
2
11
11
12
12
3
21
21
22
22
31
31
32
32
English
Use the pulse (P) for short bursts. The pulse
l
will operate for as long as the button is held in
position.
6
Reverse the above procedure to remove the lid,
attachments and bowl.
Important
Your processor is not suitable for crushing or
l
grinding coffee beans, or converting granulated
sugar to superfine sugar.
When adding almond essence or flavoring to
l
mixtures avoid contact with the plastic as this may
result in permanent marking.
Using The Attachments
Refer to recommended usage chart for
1
2
3
4
each attachment.
Knife Blade
11
12
13
14
Follow the instructions under 'to use your food
processor'.
21
22
23
24
Hints and Tips
31
32
33
34
For coarser textures use the pulse control.
l
Cut food such as meat, bread, vegetables into
l
cubes approximately 2cm/¾ in cubes.
Cookies should be broken into pieces and added
l
down the feed tube while the appliance is running.
Take care not to over-process.
l
When making pastry use fat straight from the
2
3
4
5
l
fridge cut into 2cm/¾ in cubes.
Dough Tool
12
13
14
15
Follow the instructions under 'to use your food
processor'.
22
23
24
25
Use for yeasted dough mixes.
32
33
34
35
Hints and Tips
Do not process for longer than 60 seconds.
l
Place the dry ingredients in the bowl and add the
l
liquid down the feed tube while the appliance is
running. Process until a smooth elastic ball of
dough is formed.
Re-knead by hand only. Re-kneading in the bowl
l
is not recommended as it may cause the processor
3
3
4
4
5
5
6
6
to become unstable.
Discs
13
13
14
14
15
15
16
16
–
To Use The Cutting Discs
1
Fit the drive shaft and bowl onto the power unit.
23
23
24
24
25
25
26
26
2
Holding by the center grip, place the disc onto the
drive shaft with the appropriate side uppermost.
3
Fit the lid.
33
33
34
34
35
35
36
36
4
Put the food in the feed tube.
5
Switch on and push down evenly with the pusher -
never put your fingers in the feed tube.
12
5
6
7
8
15
16
17
18
25
26
27
28
35
36
37
38
6
7
8
9
16
17
18
19
26
27
28
29
36
37
38
39
7
7
8
8
9
9
10
10
17
17
18
18
19
19
20
20
27
27
28
28
29
29
30
30
37
37
38
38
39
39
40
40
9
10
19
20
29
30
39
40
10
20
30
40