Descargar Imprimir esta página

cecotec CONGA 12090 TWICE ROLLER HOME&FILL Manual De Instrucciones página 73

Robot aspirado

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
The robot vacuum
cleaner consumes
energy inside the self-
emptying base.
The robot vacuum
cleaner does not pick up
cleaning where it left off
after charging.
Sensor detection is
inaccurate.
Poor suction or abnormal
suction noise.
No suction.
Poor self-cleaning of the
mop roller.
The mop roller cannot
self-clean.
The power consumption of the robot vacuum cleaner is
extremely low when inside the self-emptying base, which
helps keeping the battery at peak performance.
Make sure the robot vacuum cleaner is not in Do Not Disturb
mode, as it will not resume cleaning with this mode enabled.
If forced recharging is performed or the robot vacuum cleaner
is manually placed in the self-emptying base, it will not resume
cleaning once recharge is complete.
One or more sensors may be dirty; clean them with a soft, dry
cloth as indicated in the Cleaning and Maintenance section.
Clean the mixed tank thoroughly as described in the Cleaning
and Maintenance section.
Some parts of the dirt tank are blocked: thoroughly clean the
mixed tank as described in the Cleaning and Maintenance
section.
The dirt-disposal bag is full or not installed: install or replace
the bag.
If the robot vacuum cleaner has not performed the cleaning
task, the self-emptying base will not collect the dirt when the
robot returns.
During the Do Not Disturb schedule, when the robot vacuum
cleaner automatically returns to the self-emptying base,
the latter does not actively collect the dirt. We recommend
adjusting cleaning time, Do Not Disturb mode, or directly
operating the function buttons of the robot vacuum cleaner.
The mop roller is very dirty: perform self-cleaning again.
The mop roller is worn out: replace it with a new one.
If the robot vacuum cleaner has not cleaned the floor, the self-
emptying base will not clean the mop roller.
If the robot vacuum cleaner does not leave the self-emptying
base and there is no base on the app's map, the robot will not
be able to return to the base to clean the mop roller.
The clean-water tank is empty or the dirty-water tank is full or
the water tank is out of place.
CONGA 12090 TWICE ROLLER HOME&FILL
ENGLISH
73

Publicidad

loading

Este manual también es adecuado para:

08597