Costway ES10255 Manual Del Usuario página 6

Warning: When flammable gas leaks, the valve of the leak
source should be closed first and try to exhaust the indoor air.
Do not unplug the appliance or operate the ice maker to prevent
fire.
Warning: Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction
Warning: Do not damage the refrigerant circuit. Risk of fire /
flammable materials, taking care to avoid causing a fire by
igniting flammable material.
Warning: Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
■ Please according to local regulations regarding disposal of the
appliance for its flammable blowing gas.
Handling and Placing
■ Handling
Do not hold the door (cover) to carry the ice maker, it should be
lifted from the designed lifting position or bottom of the product.
It is strictly forbidden to lift the ice maker horizontally or upside
down.
■ Placing
◇ The ice maker must be used on a stable, level surface or it can
be dangerous to the user.
◇ The ice maker should be placed in a dry, ventilated place with
free-flowing air. In order to avoid overheating, affect the use effect of
the ice maker and prevent the occurrence of hazards, a space of
more than 20cm should be reserved around the ventilation grille of
the ice maker, and a space of more than 30cm should be reserved
at the top.
◇ The ventilation grills of the ice maker are not allowed to be
covered or blocked, and must be kept away from curtains and other
flammable materials. Avoid close to heat sources or direct sunlight.
10
Warning: When positioning the appliance, ensure the supply
cord is not trapped or damaged. Do not locate multiple portable
socket-outlets or portable power supplies at the rear of the
appliance.
Warning: Ice machine must not be installed in corridors or
corridors of public buildings.
Electrical Connection
■ Power supply: The ice maker uses AC power supply (specific
power supply specifications refer to the product nameplate), and the
allowable voltage fluctuation range is ±10%.
■ In order to ensure safe use, the socket and its connecting wires
must be able to withstand more than 10A of current.
■ Be sure to use a separate, three-conductor power outlet with safe
ground wire.
Use
Preparation Before Use
■ Remove all packaging components, including foam pads at the
bottom, foam pads and tape (if any) for internal securing
accessories.
■ Inventory random attachments and information.
■ Place the ice maker in the proper location by referring to the
relevant contents in Handling and Placement.
■ Follow the cleaning tips to clean the inside and outside of the ice
machine.
Start to Use
■ Insert the plug according to the electrical connection instructions
and turn on the power.
■ Fill with water following the instructions for filling and draining.
11