Costway ES10255 Manual Del Usuario página 7

■ Refer to the instructions on the operation panel and function
settings to set up and start up.
The ice maker that has been moved should be stationary for 30
minutes before starting to make ice, otherwise the cooling effect
will be affected, and the cooling system will be damaged in
severe cases.
Make sure that the plug connection is firm. Loose plugs can
cause cords and receptacles to heat up, break, and even on
fire.
Please ensure that the ventilation grille of this product and its
surroundings are free from obstacles to ensure ventilation of the
product.
Operation Panel and Functions
LED display
screen
Alarm icon
Appointment icon
Count/Timer icon
Ice making button
Set button
Operation panel illustration
■ Standby Mode
－ Switch on the power supply, the ice making icon flashes, set
button icon is on for a long time, and machine enters screen-off
standby mode. Pressing an undisplayed button at this time is invalid.
－ Shortly press the set button to wake up the LED display and
those button icons that not displayed on the screen, and enters
standby mode. If there is no operation within 1 minute, it will
automatically enter screen-off standby mode.
12
Count/Timer
Ice full icon
Water shortage icon
Ice making icon
Wash icon
Wash button
Adjust button
－ Under ice making mode, shortly press the ice making button
once, and ice making icon flashes, the machine enters standby
mode.
■ Ice Making Mode
－ Under other working modes except washing reminder mode,
shortly press the ice making button, the ice making icon is on for a
long time, LED screen is displayed and the machine enters ice
making mode.
－ During ice making process, shortly press the ice making button to
stop ice making and enters standby mode.
■ Washing Mode
－ When the machine is under standby mode and LED display is
in the awake state, shortly press the washing button, the washing
icon will be displayed and countdown for 6 minutes, machine enters
washing mode.
－ After the washing mode is finished, it will automatically return to
standby mode.
－ During the washing process, shortly press the ice making button
or washing button to exit washing mode.
■ Ice Full Reminding Mode
－During the ice making process, when the ice cube blocks the
signal transmission of the photoelectric sensor, the ice full icon will
be displayed, and a "beep" sound will be emitted for about 3
seconds, automatically enters the ice full reminding mode.
－ When the ice cubes are melted or removed manually, the signal
transmission of the photoelectric sensor is recovered, and it will
automatically resume ice making.
◇When there is no ice cube or other foreign objects block the signal
transmission of the photoelectric sensor but indicating ice full, it
means that the photoelectric sensor is in failure. At this time, if you
need to make ice, you can press and hold the ice making button for
3S to force ice making for 60 minutes. Alarm, timer and ice full icons
will be displayed on LED screen. When the countdown number
reaches 0, the machine stops making ice and enters ice full
reminding mode.
13