Descargar Imprimir esta página

Costway NP10764 Manual Del Usuario página 4

Castillo hinchable

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
2. Place the blower (air pump) where it will not
inhale dust or leaves, and keep the blower (air
pump) and power cord away from children and
water. Note: Please make sure the power supply is
safe and reliable. During use, the blower (air
pump) should remain on and continue to inflate.
After stretching the air pipe, position the blower
(air pump) at the end of the air pipe. Wind one end
of the tube around the blower (air pump), blow out
the air after tying. The inflation tube should be
straight and not twisted. If necessary, adjust the
position of the blower (air pump). Then use ground piles to firmly fix
the blower (air pump) on the ground.
3. Please fix the product correctly, and be sure to
fix the product with ground stakes before use. In
order to prevent overturning during the game,
please push the pile firmly into the ground, and
regularly check whether the ground pile is firm.
Ground piles should be flush with the ground or
buried in the ground to reduce the risk of tripping. Please ensure that
the product is fully inflated before children enter the playground.
Using this product when inflated or excessively deflated may cause
product instability and may cause serious injury. Since the product is
kept inflated by a constant air flow, air leakage from the joint is
normal and necessary, so the product will not over-expand.
06
Maintenance Instruction
Outdoor products are easy to wear and
require proper maintenance. When the
fabric is found to be invalid, fragile or
damaged, it must be repaired in time,
and the provided patch can be used to
repair it. To repair, deflate thoroughly
and make sure the surface is dry. Cut
the patch to fit the patch. Apply glue on
both the repair patch and the damaged
surface, let the glue dry for 30 seconds,
and then stick the patch on the surface.
Allow to dry at least 4 hours before
using. Store the product and blower in a
dry environment when not in use.
Disassembly Instructions
1. Make sure that after all children leave the product, turn off the
blower (air pump), remove the inflation tube, unplug the power cord
of the blower (air pump), remove the ground pile, and store the
blower (air pump) in a dry place for future use. When the product is
not in use, do not put the product and the blower (air pump) in the
rain
2. After discharging the air completely, fold the product for storage.
Wrong
Right
07

Publicidad

loading