4.
Press the "Steam" button and turn the steam control to release the remaining
air. Keep this process going for at least 30 seconds when you are using the
device for the first time or have not used it for a long time.
Note: The residual air inside can cause the device to not work properly!
5.
Turn off the steam regulator and press the "On/Off" button for the next step.
6.
Attach the portafilter to the device.
7.
Press the "On/Off" button, place a container with a capacity of at least 500 ml
under the water outlet and press the "2 cups" button when the lights are on
steadily. Repeat this process 5 times.
EN
29