EN
34
Preparation of hot water
1.
Switch the unit on by pressing the "On/Off " button.
2.
Make sure the "1 cup" button and "2 cups" button lights are on and turn the
steam/water knob anti-clockwise to open the valve.
3.
Immediately press the "1 cup" button or the "2 cups" button to dispense
water.
4.
Once the preset amount (1 or 2 cups) of hot water has been dispensed, turn
the Steam/Water control dial clockwise to the off position to close the valve.
Note: When the steam button is lit, the „1 cup" or „2 cups" function cannot be
selected. Press the steam button again to exit the steam/water mode.
CAUTION
Risk of burns and scalding! The water running out of the espresso
machine is hot. If you are using a metal jug, the jug will also get
hot.
•
Press the "On/Off " button to switch off the device and unplug the power cord
from the outlet when you are no longer using the device.
1 cup
or
On / off
1 cup
2 cups
2 cups
Steam