PEDROLLO DGF/T M/M 8.5 Manual De Uso Y Mantenimiento página 43

If the Or the
current temperature
measured of the
component
by the
s of the
inverter
inverter
During self-restraint operation the DISPLAY and the LEDs will flash to indicate the status of
fault
The menu INSP (inspection) allows you to view the inverter operation logging, and in particular:
the hours of operation, the number of start-ups, alarm recording
INSP WH
TH
NS
SH
E1
EH
EE
OVERLOAD SELF-RESTRAINT
exceed
the safety
limits
INSPECTION MENU
PUMP OPERATION HOURS
POWERED-ON INVERTER
HOURS
TOTAL NUMBER OF STARTS
AVERAGE NUMBER OF
STARTS
LAST ERROR
TIME OF LAST ERROR
RESET ERRORS
DGFIT
progressively
reduces the
operation frequency
Hours of pump operation (motor running)
Hours of operation (device on, with pump running or in
STANDBY)
Number of starts of the pump since installation.
Average number of starts per hour of inverter
switching on
Last error recorded
Time of the last error recorded
Allows to reset the error log; to reset the log press the
ENTER key and hold until the confirmation "OK" is
displayed (ENTER
43
Until the
exceeding
values comply
with allowed
limits
**** OK)
 