Craftsman 917.27690 Manual Del Operador página 10

13.Disengagebelttensionrod (K)from lock-
ing bracket(L).
14.Installbeltonto engineclutch pulley(M).
IMPORTANT:Checkbeltfor properrouting
in all mowerpulleygrooves.
10.Turnsteeringwheelto positionwheels
straightforward.
11.A-FFACH FRONTLINK (E)- Workfrom
left sideof tractor.Insertrod endof link
assemblythroughfront hole in tractor
frontsuspensionbracket(F)and secure
with retainerspring(G)through hole in
link locatedbehindthe bracket.
12. Insertotherend of link(E) into hole in
frontmowerbracket(H) and securewith
washerand retainerspring (J).
15.Engagebelttension rod (K)on locking
bracket(L).
A CAUTION: Belt tension rod is spring
loaded. Have a tight grip on rod and engage
slowly.
16. Raise attachment lift lever to highest
position.
17. If necessary, adjust gauge wheels
before operating mower as shown in the
Operation section of this manual.
02937A
10