Descargar Imprimir esta página

Craftsman 917.27690 Manual Del Operador página 19

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE
BEFORE
EVERY
EVERY
EVERY
EVERY
EVERY
BEFORE
EACH
8
25
50
100
REASON
STORAGE
SCHEDULE
USE
HOURS
HOURS
HOURS
HOURS
Check Brake Operation
Check Tire Pressure
T
R
3heck
Operator
Presence
& ROS System_
A Check for Loose Fasteners
C Check/Replace
Mower Blades
T
Lubrication
Chart
0 Check Battery Level
a
Clean Battery and Terminals
Check Transaxle
Cooling
Check Mower Levelness
v'
v'
Check V-Belts
Check Enqine Oil Level
Change Engine Oil (with oil filter)
Change Engine Oil/without
oil filtel
_
Clean Air Filter
G Clean Air Screen
I inspect Muffler/Spark
Arrester
N Replace Oil Filter (If equipped)
E Clean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
_1,2
v"
Replace Fuel Filter
1 - Change
more often when operating
under a heavy load or
in high ambient
temperatures.
2 - SerVice more often when operating
in dirty or dusty conditions.
v"
v"
3 - Replace
blades
more often when mowing
in sandy soil.
4 - Not required
if equipped
with maintenance-tree
battery.
GENERAL
RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence.
To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments
will need to be made
periodically
to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described
in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE
EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator
presence and
ROS systems for proper operation.
5. Check for loose fasteners.
LUBRICATION
CHART
_0 Spindle __[_
Spindle
Zerk
_
_
Zerk
(i_ FrontWheelm2_
[j;.."_
Bearingzerk
Bearing zerk _U_/_
1/
_@
Engine
_f) Steering __
Sector Gear.
_ _
_
\
.......
Teeth
( _]f-7_"_-_
uJ IVlanerel
. _
Zerks
_.bGeneral Purpose Grease
@Refer to Maintenance
"ENGINE"
Section
IMPORTANT:
Do not oil or grease the
pivot points which have special nylon
bearings.
Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating
bearings.
If you feel they
must be lubricated,
use only a dry, pow-
dered graphite type lubricant sparingly.
19

Publicidad

loading