Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: Reception may be considerably reduced by obstructions (e.g. concrete
walls) or sources of interference (e.g. other electrical products). In the event of
reception problems, change the position of the product (e.g. to somewhere near a
window).
˜ Operation
˜ Receiving the DCF/MSF radio time signal
1. Insert a 1.5 V AA/LR6 battery according to the polarity marks into the battery
5
compartment
2. The product automatically starts to search for the DCF/MSF radio time signal.
This process takes about 3 to 12 minutes to complete.
Within 4 minutes, the hands will move to 12 o'clock. The radio signal reception
is initiated once all the hands have moved to the 12 o'clock position. After 3 to
10 minutes, the clock will receive the signal and set itself to the exact time.
The reception of the DCF/MSF radio time signal by the product can also be
started manually:
Press and hold the REC button
least 5 seconds. The product attempts to receive the DCF/MSF radio time
signal. This process takes a few minutes to complete.
NOTE: If the product was not able to receive the DCF/MSF radio time signal
because of errors, e.g. due to your location being too great a distance from the
transmitter or for other reasons, you can set the time manually. The manually set
value is overwritten as soon as reception of the DCF/MSF radio time signal is
successful.
NOTE: For products in tended for Romania, Cyprus, Bulgaria, Finland and
Greece, the display stops at "01:00".
on the back of the product.
3
using a pointed object (e.g. pencil) for at
GB/MT
37
Publicidad
