Publicidad
Idiomas disponibles
Idiomas disponibles
˜ Setting the time manually
1. Press and hold the SET button
least 3 seconds. The product switches into manual mode.
2. Press and hold the SET button again until the hands reach the correct position
for you to set the time.
3. Briefly pressing the SET button moves the hands forward in one minute steps to
enable you to set the current time manually.
NOTE: After 8 seconds without pressing the SET button, the product switches
out of manual mode and keeps the time as normal. The manually set value
is overwritten as soon as the reception of the DCF / MSF radio time signal is
successful.
˜ Resetting the settings
Press the RESET button
product settings. Alternatively, remove the battery from the product and insert it
again. The product now automatically starts to search for the DCF/MSF radio
time signal.
˜ Cleaning and care
Only clean the product on the outside, using a soft dry cloth.
If the product is not going to be used, remove the battery.
NOTE: When the battery voltage is depleted after about 9 months
(depending on reception quality), the second hand will stop moving. However, the
hour and minute will keep on showing the right time until the battery voltage is too
low, after which the product will stop completely.
Change to a new battery as soon as this occurs.
38 GB/MT
2
using a pointed object (e.g. pencil) for at
4
using a pointed object (e.g. pencil) to reset the
Publicidad
