Zummo Z40-LM Manual De Usuario página 34

2 If the tray is not assembled or is not in place, the machine will not operate and the
display will show an Error message by displaying a flashing dark tray.
3 If one of the side covers is incorrectly positioned, the machine will not work and the
display panel will show Error. The corresponding side cover will appear shaded
intermittently.
4 If one of the bins/chutes is incorrectly positioned, the machine will not work and the
display panel will show Error. The corresponding bin/chute will appear shaded
intermittently.
5 If the exterior basket is incorrectly positioned, the machine will not work and the
display panel will show Error. The basket will appear shaded intermittently.
6 If for any reason the machine gets blocked during operation, after a few seconds the
motor will stop automatically and the display will show an Error message with a faulty
flashing icon, until the cause of the blockage is removed.
7 Thanks to a thermal protection system in the motor, in the event of overheating the
machine will stop and the display will show an Error message and a thermometer
icon / Error message with a faulty flashing icon. In this case, please wait
approximately 10 minutes to allow the motor temperature to decrease. The error
message will disappear. Please check that the ventilation gratings and the fan are
not obstructed.
8 If there is no message on the display, it means there is no power supply. Check that
the power switch is on and that the plug fuse is not burnt out (Fig. 31).
34
B40C B40A/B40B/B40E