RIDGID R4021SN Manual Del Operador página 15

ASSEMBLY
 Align holes for hardware.
NOTE: The Tube support bracket fits inside the "L" support
bracket.
 Slide a washer over a bolt. Insert the bolt through the
outside of the "L" support bracket.
 Insert a spacer between the "L" and Tube support brackets.
Push the bolt through the spacer and the hole in the Tube
support bracket.
 Slide a washer and hex nut over the bolt and tighten the
nut.
"L" SUPPORT
BRACKET
NUT
STAND
LEG 1
"L" SUPPORT
BRACKET
BOLT
WASHER
SPACER
TUBE
SUPPORT
BRACKET
WASHER
TUBE
SUPPORT
BRACKET
15 — English
 Repeat with the other side of the stand, matching the
numbers on the stand legs to the numbers on the support
brackets.
 Using wrenches, securely tighten hardware but do not
overtighten.
NOTE: EACH SUPPORT BRACKET
IS MARKED WITH A "1" AND A "2"
STAND
LEG 2
ALWAYS ASSEMBLE
"1" AND "1"
TOGETHER
ALWAYS ASSEMBLE
"2" AND "2"
TOGETHER
"1" AND "2" SHOULD
NOT BE ASSEMBLED
TOGETHER
BOTTOM VIEW
ASSEMBLED
Fig. 12