HQ-Power HQSA1010 Manual Del Usuario página 5

5.2 Control Panel
5.3 Use with a TF Card
Switch on the device and insert a TF card into the appropriate slot. The music files start
to play automatically.
5.4 Aux Mode
Switch on the device and connect your auxiliary device to the speaker using the
included cable.
5.5 Wireless Use
1. Switch on the device.
2. Switch on your audio source and enable the wireless function.
3. Search for the speaker name [HQSA1010] and enter the password [0000]. The
power LED will stop blinking to indicate the wireless connection has been
successful.
4. With an incoming call, short press the play/pause button to receive/reject the call,
double press the button to re-dial the last number.
6. Cleaning and Maintenance
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals,
cleaning solvents or strong detergents.
V. 01 – 17/05/2018
HQSA1010
play/pause

press shortly to play/pause or receive/reject calls

hold pressed to switch from wireless mode to card/aux mode

double press to pair to a second speaker
previous/decrease volume

hold pressed to select previous track, press shortly to decrease volume
next/increase volume

hold pressed to select next track, press shortly to increase volume
on-off

hold pressed to switch device on/off
LED control

hold pressed to switch effects on/off, press shortly to select pattern
5 ©Velleman nv