EINHELL GE-CR 30 Li Manual De Instrucciones página 13

battery from the device. Never use or charge a
defective battery.
7. Cleaning and maintenance
HAZARD!
Always pull out the safety plug before making
adjustments or carrying out maintenance,
cleaning and repair work on the equipment. Make
sure that the tine shaft is not turning.
7.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it down with compressed air at
low pressure.
•
We recommend cleaning the equipment
immediately each time after use.
•
Clean the equipment regularly with a damp
cloth and some soft soap. Do not use
cleaning agents or solvents; these may
be aggressive to the plastic parts in the
equipment. Ensure that no water can get into
the interior of the equipment. The ingress of
water into an electric power tool increases the
risk of an electric shock.
7.2 Replacing the cultivator tines
For safety reasons, we recommend having the
tiller tines replaced by an authorized professional.
Warning!
Wear working gloves. Use only genuine spare
parts since otherwise the function and safety of
the machine cannot be guaranteed.
7.3 Maintenance
Make sure that all mounting components (i.e.
screws, nuts, etc.) are always tightened so that
the equipment can be safely operated at all times.
Store the equipment in a dry room. All the metal
parts should be cleaned and then oiled to make
sure that they provide a long life. For the best
results, clean the plastic parts of the machine with
a brush or rag. Do not use any solvents to remove
dirt.
For space saving storage undo the lock knobs
(Fig. 7,8/Item 8) and fold the push bar together
as shown in Fig. 16. Make sure that you do not
damage the cable. At the end of the season,
perform a general inspection of the equipment
and remove any deposits which may have
Anl_GE_CR_30_Li_USA_SPK7.indb 13 Anl_GE_CR_30_Li_USA_SPK7.indb 13
EN
accumulated.
At the start of each season, make sure that you
check the condition of the machine. If repairs are
necessary, please contact one of our customer
service centers.
8. Disposal and recycling
The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 41°F and 86°F
(5°C and 30°C). Keep the electric tool in its
original packaging.
The reprinting or reproduction by any other
means, in whole or in part, of documentation
and papers accompanying the products is
strictly subject to the express consent of Einhell
Germany AG.
Subject to technical changes.
- 13 -
19.07.2023 11:15:38 19.07.2023 11:15:38