EINHELL GE-CR 30 Li Manual De Instrucciones página 9

appliance. Carrying the appliance with your
finger on the switch or energizing appliances
that have the switch on invites accidents.
•
Disconnect the battery pack from the
appliance before making any adjustments,
changing accessories, or storing appliance.
Such preventive safety measures reduce the
risk of starting the appliance accidentally.
•
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
•
Have servicing performed by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the product is maintained.
•
Protect your rechargeable battery against
moisture, rain and high humidity. Moisture,
rain and high humidity can cause dangerous
cell damage. Never charge or work with
batteries which have been exposed to
moisture, rain or high humidity – replace them
immediately.
•
If your equipment is fitted with a detachable
battery, remove the battery for safety reasons
after you have finished your work.
IMPORTANT SAFETY INSTRUCTIONS FOR
CHARGER
WARNING: This product may contain lead,
phthalate or other chemicals known to the State
of California to cause cancer, birth defects and
other reproductive harm. Please wash your hands
after use.
Special safety information
•
Read the operating instructions carefully.
Familiarize yourself with the operator controls
and proper operation of the machine.
•
Never allow children or other persons who
are not familiar with the operating instructions
to use the equipment. Contact your local
governmental agency for information
regarding minimum age requirements for the
user.
•
Never work in the direct vicinity of persons -
especially children - or animals.
•
Always keep in mind that the machine
operator or user is responsible for accidents
involving other persons and/or their property.
Anl_GE_CR_30_Li_USA_SPK7.indb 9 Anl_GE_CR_30_Li_USA_SPK7.indb 9
EN
Preliminary measures
•
Always wear sturdy, non-slip footwear and
long trousers when using the machine. Never
use the machine barefoot or in sandals.
•
Check all the ground on which the machine
will be used and remove all objects that could
be caught up and violently flung out by it.
•
Before using the machine, always visually
examine the tools for excessive wear or
damage. To prevent any imbalance, replace
worn out or damaged parts and mounting
bolts as a set only.
•
Make sure that all nuts, bolts and screws are
tightened securely and that the machine is in
safe working condition.
Handling
•
Only use the machine in broad daylight or in
well-lit conditions.
•
Always maintain good footing on inclines.
•
Only operate the machine at a walking pace.
•
Work perpendicular to the slope, never up or
down it.
•
Be particularly careful when you change
direction on a slope.
•
Do not work on overly steep inclines.
•
Be particularly careful when you turn the
machine around or pull it toward yourself.
•
Switch on the motor carefully as described
in the instructions from the manufacturer
and ensure that you keep your feet at a safe
distance from the tool.
•
Never move your hands or feet toward or
under any rotating parts.
•
Never lift or carry a machine whilst the motor
is running; in addition the safety plug should
be pulled out.
•
Switch the motor off whenever leaving the
machine.
•
If the machine begins to experience unusual
vibrations, switch it off immediately and check
it.
Maintenance and storage
•
Make sure that all nuts, bolts and screws are
tightened securely at all times to ensure that
the machine is in safe working condition.
•
Allow the engine to cool down before you put
the machine in an enclosed area.
•
For safety reasons, replace worn or damaged
parts.
•
Always switch the machine off and unplug the
safety plug before making any adjustments or
cleaning it.
•
Switch off the engine and pull the safety plug
- 9 -
19.07.2023 11:15:37 19.07.2023 11:15:37