HIKOKI EC36DA Instrucciones De Manejo página 10

English
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Direct current
V Rated voltage
Disconnect the battery
Switching ON
Switching OFF
Warning
Electric shock hazard.
Hearing protection must be worn.
Guaranteed sound power level
Do not open the cock before the air hose is
attached.
Risk of high temperature.
Warning of compressor unit may start without
warning
Do not expose to rain.
Store indoors.
Risk of Bursting
Do not adjust the regulator to result in output
pressure greater than the marked maximum
pressure of the attachment. Do not use at a
pressure greater than the rated maximum
pressure of this compressor.
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or
malfunction. The problem may be the battery
so please contact your dealer.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains
the accessories listed on page 318.
Standard accessories are subject to change without
notice.
SPECIFICATIONS
1. Cordless Air Compressor
Model
Motor
Voltage
Tank Capacity
Maximum Pressure
at 2.8 bar
(40 PSI)
Free Air
Delivery
at 6.2 bar
(90 PSI)
Lubrication
Battery available for this
tool*
Weight**
* Existing batteries (BSL3660/3626/3620, BSL18xx and
BSL14xx series, etc.) cannot be used with this tool.
** According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
2. Battery Charger (sold separately)
Model
Input power source
Charging time
(At a temperature of 20°C)
Charging voltage
Charging current
Weight
NOTE
The charging time may vary according to temperature
and power source voltage.
10
EC36DA
Brushless DC
36 V
7.3 Itr (1.9 gal.)
9.3 bar (135 PSI)
65.1 ltr/min (2.3 CFM)
45.3 ltr/min (1.6 CFM)
Oil-less
Multi volt battery
14.3 kg (31.5 Ibs)
(BSL36B18 attached)
UC18YSL3
Single phase:
AC 120 V 60 Hz
BSL36B18 : Approx.52 min
DC 14.4–18 V
DC 8.0 A
0.6 kg