HIKOKI CG 18DA Instrucciones De Manejo página 24

English
Symptom
The brake takes more than three
seconds to take effect, even after you
release the lever.
The nylon head will not turn.
The blade does not rotate
Possible cause
There may be a problem with the
product.
The nylon head mount is not fitted
correctly.
The cutter holder is not installed
correctly
The blade is deformed
24
Remedy
Contact the store where you
purchased the tool or your nearest
HiKOKI Authorized Service Center.
Reattach the nylon head mount.
Reinstall the cutter holder.
Replace the blade.