Appliance Description; Initial Use; Use - Beurer FB 21 Instrucciones Para El Uso

The device is only intended for the purpose described in these operating instructions. The manufacturer
cannot be held liable for damage occurring as a result of inappropriate or careless use.

6. Appliance description

11
10
8
9
7
6
8a

7. Initial use

• Remove the packaging
• Check the device, power supply and cables for damage.
• Before you plug in the foot bath, fill it up to the fill-level mark (approx 4-5 cm full) with either warm or cold
water. The foot rest should, however, be completely covered with water.
• The foot bath is balanced only when it is filled no further than the fill-level mark. Otherwise, the foot bath
may tip over when the carrying handle is used.
• Route the cable safely so that there is no risk of anyone tripping over it.
• Place the foot bath on a firm and level surface.

8. Use

Make yourself comfortable in a chair and place your feet on the foot rest and apply slight pressure. Never
stand up in the foot bath. The rubber feet on the base of the unit prevent it from sliding.
The device has two massage functions:
• Function 1 : bubble massage, infrared light and maintains water temperature
12
5
4
8b 8c
1
2
3
1. Removable splash protection
2. Fill-level mark
3. Bubble bar
4. Rubber feet (on underside of device)
5. Function button
6. Function button
7. Massage roller attachments
8. Interchangeable pedicure attachments
a Callus remover
b Brush
c Massage attachment
9. Infrared light dots
10. Foot rest with massage nodules
11. Carrying handle
12. Draining outlet
13. Cord winder (on underside of device)
14
13