Descargar Imprimir esta página

Briggs & Stratton Generac 2700 PSI Manual Del Usuario página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

KNOW
YOUR
PRESSURE
WASHER
Read this owner's manual
and safety rules
before
operating
your high pressure
washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls
and
adjustments.
Save this manual for future reference.
Spray Nozzles
Accessory Tray
Fuel Tank
Nozzle Extension with
Quick Connect
Throttle Lever
Choke Lever
J
Fuel Valve
Recoil Starter
(on front of engine)
Air Filter
Spray Gun
Chemical Injection
Siphon/Fitter
Accessory
Tray m Provides convenient storage for
standard and optional accessories, such as brushes, turbo
wands, ect.
Air Filter
--
Protects
engine
by filtering
dust
and debris
out
of intake air.
Automatic
Cool Down System -- Cycles water through
pump
when
water
reaches
125 % 155_F. Warm
water
will
discharge from pump onto ground. This system prevents
internal
pump
damage.
Chemical
Injection Siphon/Filter
-- Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Choke
Lever --
Prepares a cold engine for starting.
Fuel Tank -- Fill tank with regular unleaded gasoline. Always
leave room for fuel expansion.
Fuel Valve --
Used to turn fuel on and off to engine.
High Pressure
Hose (not shown) -- Connect one end to
the water pump and the other end to the spray gun.
Oit Fill Cap
/
High Pressure
Outlet
Pump equipped
with Automatic
Coot Down
System
High Pressure
Outlet
-- To connect high pressure hose.
Nozzle
Extension with Quick Connect -- Allows you to
switch between four different spray nozzles.
Oil Fill Cap --
Fill engine with oil here.
Pump --
Develops high pressure.
Recoil Starter
-- Use for starting the engine manually.
Safety Goggles (not shown) --
Always use the enclosed
goggles or other eye protection
when running your
pressure washer.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.
Spray Nozzles -- Chemical
injection,
0 °, 15 °, 25 °,
and 40°:
for various high pressure cleaning applications.
Throttle
Leve_Sets
engine in starting mode for recoil
starter and stops a running engine.
Water
Inlet -- Connect garden hose here.
/
4

Publicidad

loading