Broan Elite E661 Instrucciones De Instalación página 5

3. PREPARETHE HOOD
3.1 Pull latch tabs and remove filters from the hood.
3.2 Remove both screws retaining each side panel and set aside.
!
sc°Ew O
LOCATIONS
HO0160
3.3 Press on tabs and pull to disconnect light assemblies from electrical
harnesses.
Remove both panels and set aside.
3.4 Remove both transport bracket retaining screws. Discard the
transport bracket and one of its screw (set the second screw aside).
Do not reinstall the transport bracket.
HO0167
3.5 Remove the 9 screws retaining the bottom panel to the hood and
set aside. Slide out the bottom panel and set aside.
NOTE: Wires not shown in illustration to ease understanding.
HO0159
-5-