Publicidad
Idiomas disponibles
Idiomas disponibles
Do not set up the device in a hot, wet or extremely damp environment or near flammable
material.
The device requires an adequate flow of air in order to operate correctly. Leave a
clearance of 15 cm around the appliance.
WARNING! Do not close the ventilation openings in the device housing.
The electrical socket must be easily accessible so that the power lead can be
disconnected easily, in the case of an emergency.
The installation and assembly of this device in non-stationary setup locations (e.g. on
ships) must be carried out by specialist companies / electricians, provided they guarantee
the prerequisites for the safe use of this device.
For energy saving reasons please ensure that the door is closed when the appliance is
turned on.
10.5.2
Legs/feet
There are FOOT (3 bigger feet and 1 small foot).
To level your appliance, adjust the front legs at the bottom of the appliance.
10.5.1
The handle installing
The wine cooler comes with one
metal stainless steel handle. To install
simply screw them to the door with
the supplied screws.
To do this, slide the rubber seal on
the back of the door to the side to lay
open the predrilled holes. Use the
included screws to install the handle
on the door.
Then reinsert the rubber seal in the
correct position.
29
Publicidad
