Descargar Imprimir esta página

CASO DESIGN WineSafe 12 Manual Del Usuario página 31

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
11 Operation and Handing
This chapter provides you with important notices with regard to operating the device.
11.1 Operating elements and displays
The device transmits the following signal sounds as an acoustic feedback signal:
Please note
► Use the buttons
► Temperature recommendations: Red wine: 12°C – 16°C and white wine 6°C – 10°C.
► The device can achieve the best cooling and consumption results at a recommended
ambient temperature of 16-20 °C.
If you press the power button the device starts/stops working.
When the LED lights the device is working.
You can set the temperature as your desire by pressing the button. There are buttons on the
panel
and
You can turn the interior light on or off by pressing the "Light" button. The light will
switch off automatically after 4 hours to save energy.
Pushing the temperature key
mode will be exchange between °C and °F. The temperature in the device depends on the
room temperature, the quantity of bottles and the chosen temperature. Please note that your
device is intended to cool wine. The maximum temperature that can be reached inside the
device cannot be significantly ABOVE the ambient temperature at the setup location.
11.2 Rating plate
The rating plate with the connection and performance data can be founded on the back of
the device.
12 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining the
device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
and
to set the temperature in the range of 5-20°C.
to adjust the temperature by 1°C among 5-20°C.
and
for 5 seconds, then, temperature display
31

Publicidad

loading