Publicidad
Idiomas disponibles
Idiomas disponibles
SYMBOLS
Arrows
show direction
objects will
be thrown
by line rotation.
_
ear eye protection
Wear dust mask
OPERA?ION IHSTRUC?IONS
NOTE= Before using the tool, read the
instruction
book carefully.
1. UNPACK
THE UACHINE
1).Take the three legs (6) out of the funnel.
(See Fig. A)
2)Take the funnel cover off by pressing the
locking button as shown in fig. B.
3). Remove the motor housing
from the
funnel. (See Fig. C)
4)Take the funnel out of the stand. (See Fig. D)
2. ASSEMBLE
THE MULCHER
STAND
1). Insert the three legs into the stand as
shown in fig. El. Make sure the alignment/
release button
of each leg (a) is properly
positioned
and extended
into each hole of the
upper portion of the stand. (See Fig. E2)
3. ASSEMUUNG
THE MULCHING
POWER
HEAD
1). Placing the motor housing
on the stand.
Make sure the motor housing
is stable on the
stand. (See Fig. F)
2). Fit the funnel onto the motor housing.
Make sure it's locked down by the clamps
found
on the motor housing.
(See Fig. G)
3). Fit the funnel cover over the funnel. Make
sure the locking tabs of the funnel cover are
securely attach to the funnel. (See Fig. H)
_
AUTION:
Properly attach the funnel
cover to the funnel by aligning
the
notches (b) of each piece
4. USING
THE
UAG
SUPPORT
RING
(See
Fig.
I,J,K|
,K2)
NOTE:
The
bag
support
ring
solwes
the
nagging
problem
of keeping
the
paper
bag
open
(paper
bags
not
included
in the
Publicidad
